WIN2000 Air Pipe Heads
The new WIN2000 series Air Pipe Heads: a revolutionary design
Smaller, better, lighter
The most innovative design in the world
Download WIN2000 Air Pipe Head general dimensions with flowcurves
In the year 2000 Winteb has developed the WIN2000 Air Pipe Head series which has set the standard in air venting. This series is also produced out of seawater resistant aluminium. The advantage of seawater resistant aluminium over our competitors who use cast-iron, welded hot dipped iron/steel constructions or stainless steel, is that aluminium (DIN1725) will not corrode and requires no maintenance. Furthermore the WIN2000 series has a space and weight saving design that is revolutionary compared to other Air Pipe Heads.
For example: The dimensions of the ND 50 are ø 106 mm by 161 mm. The weight of the ND 50 is an astonishing 2 kg.
The space saving design will allow you to place the Air Pipe Heads where they no longer form an obstacle.
Phenomenal volumetric flow
Because of its volumetric design we have achieved an average higher volumetric flow. Especially the larger sizes have got a phenomenal volumetric flow. The design is protected by international patent pending no. 1014531. Like the WIKO 5000 series the WIN 2000 series uses an O-ring sealed retaining ring. This way the PE ball, together with the O-ring, provide the best possible leakage protection.
The WIN2000 series is available in three executions;
-The type 1 execution is our normal execution Air Pipe Head used on, for example, ballast tanks.
-The type 1-B is executed with a larger anti splash water shield. It is recommended for use on tanks in which absolutely no splash water is allowed. For example on Fuel/oil tanks.
-The "small flange" connection type Air Pipe Head is designed in co-operation with the "DAMEN Shipyards"group. Just take a look at our DN50 model and how compact it is; you do not need much space to install the Air Pipe Head. See picture for the 3 different versions:
Small Flange Connection
Small flange is available in the sizes DN50/65/80/100/125
The small flange execution is our type 1-B Air Pipe Head with a flange diameter which will not exceed the diameter of the Air Pipe Head itself. This way you will never have a large flange (obstacle) underneath a small Air Pipe Head.
WIN2000 with closing device
It is also possible to deliver the WIN2000 Air Pipe Head with closing device. Download folder WIN2000 with closing device.pdf
WIN2000 with Sounding Pipe
Winteb has also designed a WIN2000 execution that features a sounding pipe. This device enables to sound the level in the tank. Please download the brochure here
WIN2000 with threaded connection
To place our Air Pipe Head on threaded pipes, Winteb also has also developed a WIN2000 model with a threaded connection (BSP). Is is possible to deliver the Air Pipe Head with a male threaded connection (threaded on the outside) as well as a female connection (threaded on the inside). Download folder WIN2000 with threaded connection.pdf
Wave Test
During classification testing for the new WIN2000 series we also conducted a "wave test" for our WIN2000 Air Pipe Heads. This test was to examen the effects of "heavy weather along with a lot of splash water" on the Air Pipe Heads. The results were very good and it has proven that the WIN2000 Air Pipe Heads are designed for use under tough circumstances. Winteb v.o.f. was the first company to conduct this test, together with a test to examen the effects of long-term ballasting. All tests are done in co-operation with Germanischer Lloyd. Yet again Winteb is ahead of regulations and is leading the Air Pipe Head market with their developments.
